Process requirements for fiberglass gaming equipment
Nowadays, the children's market is very hot. Many children's parks, shops, supermarkets, etc. have seen this business opportunity and have invested in the children's video game market. Nowadays, the children's play form is really a lot of hair, there are flying in the sky, there are swimming in the water, there are indoors, there are outdoor. Among them, there are glass fiber reinforced plastic amusement equipment. Because of its smooth surface, FRP has a good feeling. Therefore, FRP is widely used in the production of amusement equipment.
Because of its good nature and its beautiful appearance, FRP has been used in many industries, and it is no exception as a children's play video game industry. There are already a lot of amusement equipment that use FRP as raw material. So where do you need to pay attention when using FRP?
First of all, the surface of the amusement equipment produced by FRP is not allowed to have defects such as poor impregnation, poor curing, air bubbles, delamination of the cut surface, and uneven thickness.
Secondly, the surface of the equipment is not allowed to have cracks, damage, obvious repair marks, cloth marks, wrinkles, unevenness, uniform color tone, etc., and the corners are excessively smooth.
Finally, the inner surface of the amusement equipment should be neat and tidy, and no glass cloth head should be exposed. The resin content is controlled in the thickness of the gel coat layer of 0.25-0.5mm. The edge of the FRP part is smooth and smooth without delamination.
As a large-scale amusement equipment, FRP children's play facilities will have many children playing together during the operation. If the accident happens, it will be unimaginable. Therefore, pay attention to safety when selecting amusement equipment, and install it strictly according to the above details during installation.